Chipley is the county seat of Washington County, and its downtown along Jackson Avenue, its churches and the businesses near the I-10 interchange all need fire alarms that are tested and ready. TekPro serves Chipley from Panama City, just under 50 miles north on SR 77, for new installs, yearly inspections, repairs and monitoring.

Before We Begin

Every fire alarm job starts with a look at what’s on the wall now: the panel, its history, the devices and how the building is used. From there we explain what the code requires, what’s optional and what it will cost, before any work begins.

Fire Alarms for Small-Town Commercial Buildings

A lot of Chipley’s commercial space is in older buildings that have been updated a piece at a time. That can leave a building with a fire alarm panel from one era, detectors from another and wiring nobody has traced in years. We start by documenting what’s actually there, testing every device and checking that the panel can still report to a monitoring center. From there you get honest options: repair what’s working, replace what’s failing, or plan a full upgrade when the panel is past its service life. Businesses near I-10, like travel and service stops that stay open late, also need a system that reports reliably when nobody’s watching the panel.

Fire alarm work we do in Chipley includes:

• Sprinkler flow and tamper switch supervision
• Cellular communicators to replace phone lines
• Trouble and false alarm troubleshooting
• New construction and tenant build-out design
• Battery testing and replacement

Many Chipley customers pair this with 24/7 alarm monitoring or access control.

New Construction and Tenant Build-Outs

For new buildings and tenant build-outs, we design the system, coordinate permits and plans, install and test the devices, and help you through the final fire inspection. Planning the fire alarm early avoids expensive changes after the walls are closed.

Fewer False Alarms

Dusty detectors, aging devices and the wrong detector for the space all cause false alarms. During service we clean or replace problem devices and recommend better choices, such as heat detectors in areas where smoke detectors trip too easily.

Inspection, Testing and Repairs

Most fire alarm devices must be tested at least once a year under NFPA 72, which the Florida Fire Prevention Code adopts. Our fire alarm inspection and testing service covers the panel, batteries, detectors, pull stations, horns and strobes, and the signal path to the monitoring center. When something fails, you get a clear repair price.

Common Chipley Customers

• Homeowners in town and in the county
• Farms and rural properties
• Downtown businesses
• Churches

Your Panama City-Based Team for Chipley

TekPro is based at 1609 Lisenby Avenue in Panama City, and we serve Chipley and the rest of Washington County from there. Chipley is just under 50 miles from our office. Office hours are 8 a.m. to 5 p.m., Monday through Friday, and emergency service is available 24/7. TekPro’s Florida alarm contractor license, EF20002191, is held by Cole Connolly. For more about this service, see our fire alarm systems and fire alarm inspection pages, or go back to all of our services in Chipley.

Questions We Hear in Chipley

Our fire alarm panel is old. Do we have to replace the whole system?

Not always. If the wiring and many devices are in good shape, a panel replacement and selective device upgrades may be enough. We’ll test first and give you options.

Do you serve the rest of Washington County?

Yes. We work in Chipley and across Washington County, including the areas around Vernon and Wausau.

What brands do you work with?

We work with fire alarm equipment from Fire-Lite, System Sensor, Honeywell and Kidde, among others.

Ready to Get Started in Chipley?

Call (850) 329-8126 or request a free quote, and tell us about your Chipley property. We’ll talk through what you need and give you a clear, written price.