# Fire Alarms

- Link: https://tekproalarm.com/fire-alarms/
- Published: 2026-10-12T17:27:22-05:00
- Author: TekPro

### FIRE ALARM SYSTEMS | PANAMA CITY & NORTHWEST FLORIDA

# Fire Alarm Systems for Panama City Homes and Businesses

Installed right, maintained on schedule, and monitored 24/7 by a licensed local 
team.

[Request a Free Quote](https://tekproalarm.com/#contact) [Call (850) 329-8126](https://tekproalarm.com/fire-alarms/8503298126)

Florida Alarm System Contractor license EF20002191 | Live local support | 24/7 monitoring

## Fire Protection From a Team That Answers the Phone

A fire alarm has one job: warn people early and get help on the way fast. TekPro
designs, installs, inspects, and monitors fire alarm systems for homes and businesses
in Panama City and across Northwest Florida. We’re a local company. Live people 
who work for us answer the phone, and our own technicians do the service work, so
you see a familiar face on every visit.

Need a new system, an annual inspection, or help with a panel that won’t stop beeping?
We can help with all three.

## Residential and Commercial Fire Alarms

### For Your Home

Smoke alarms that only beep inside the house can’t help if nobody is home. A monitored
fire alarm system sends an alert to our monitoring center, so help can be called
even when you’re at work, asleep, or out of town.

 * Monitored smoke, heat, and carbon monoxide (CO) detection
 * Works with your TekPro [security system](https://tekproalarm.com/home-security/)
   and app
 * Help with new-construction and remodel requirements

### For Your Business

Offices, shops, restaurants, churches, warehouses, and multi-unit buildings need
a system that passes inspection and stays that way. We handle the work from the 
first drawing to the final test with your fire official.

 * New systems, expansions, and tenant build-outs
 * Annual inspections and testing with written reports
 * 24/7 monitoring of fire, trouble, and supervisory signals

## Our Fire Alarm Services

### Installation

New fire alarm systems designed for your building, with permits and final testing
included.

[Get an Install Quote](https://tekproalarm.com/#contact)

### Inspection & Testing

Scheduled inspections that check every device and give you the paperwork your fire
official and insurance company ask for.

[Schedule an Inspection](https://tekproalarm.com/#contact)

### 24/7 Monitoring

Your system reports to a monitoring center around the clock, so a fire signal gets
a real response.

[Learn About Monitoring](https://tekproalarm.com/#contact)

### Maintenance & Repair

Fixing trouble signals, replacing batteries and old detectors, and cutting down 
on false alarms.

[Request Service](https://tekproalarm.com/#contact)

### Upgrades & Takeovers

Already have a system from another company? We can inspect it, service it, monitor
it, or replace an outdated panel.

[Talk to Us](https://tekproalarm.com/#contact)

## Fire Alarm Inspections and Florida Code Compliance

In Florida, commercial fire alarm systems fall under the Florida Fire Prevention
Code. That code adopts NFPA 72, the national fire alarm code, which sets how systems
are installed, inspected, tested, and maintained. Your local fire official enforces
it and may have local rules too.

What that means for you:

 * **Regular testing.** Most fire alarm devices need to be tested at least once 
   a year, and some parts get checked more often. We set up a schedule that fits
   your building.
 * **Smoke detector sensitivity checks.** NFPA 72 calls for these on a set schedule
   after installation. We track the dates for you.
 * **A tag on your panel.** Florida requires a service tag on the fire alarm control
   panel after any installation, inspection, test, or repair. We fill it out every
   time.
 * **Written reports.** You get a report after each inspection, ready to share with
   your fire marshal, property manager, or insurance agent.

If something fails, we’ll explain what it is in plain words, what it costs to fix,
and how fast we can get it done.

## 24/7 Fire Alarm Monitoring

A fire alarm only helps if someone acts on it. With TekPro monitoring, your system
is watched around the clock, including nights, weekends, and holidays.

Here’s what happens when your alarm goes off:

 1. A detector or pull station triggers the alarm, and the horns and strobes sound 
    in your building.
 2. Your panel sends a signal to the monitoring center over cellular, internet, or 
    phone line.
 3. The monitoring center contacts the fire department and calls the people on your
    contact list.
 4. If the panel reports a problem instead, such as a cut wire, a low battery, or lost
    power, we’re alerted so it can be fixed before it matters.

Monitoring is included with every system and is billed monthly, quarterly, or yearly,
depending on your contract.

![Monitoring center operators watching for fire alarm signals around the clock](
https://tekproalarm.com/wp-content/uploads/2020/06/centralstation094_hi-jpg.jpg)

## Maintenance and Repairs

Beeping panels, false alarms, and “trouble” lights are common, especially in older
systems and after storms or power outages. We find the cause and fix it. That might
mean a dead backup battery, a dirty detector, a loose wire, or a part that has reached
the end of its life. We also replace outdated panels when parts are no longer made.

## Types of Fire Alarm Systems We Install

 * **Conventional systems.** Devices are wired in zones. When one goes off, the 
   panel shows which zone, such as “2nd floor east.” A simple, cost-effective choice
   for smaller buildings.
 * **Addressable systems.** Every device has its own address, so the panel shows
   exactly which detector or pull station was triggered. Best for larger buildings
   and easier to troubleshoot.
 * **Detection devices:** smoke detectors, heat detectors, carbon monoxide detectors,
   duct detectors for HVAC systems, and manual pull stations.
 * **Notification devices:** horns, strobes, and horn/strobes that alert people 
   to get out, including people who are hard of hearing.

Not sure which you need? We’ll recommend the right type for your building and budget,
and we won’t oversell.

## Fire Alarm Brands We Work With

We install trusted, industry-standard fire equipment, including Kidde and System
Sensor and Honeywell fire alarm products.

## How It Works

### 1. Free Consultation

We visit your home or building, look at the space, and ask how it’s used.

### 2. Design and Permits

You get a clear plan and quote. For commercial jobs, we prepare the plans and pull
the permits.

### 3. Professional Install

Our technicians install and program the system and keep the work area clean.

### 4. Testing and Inspection

We test every device, then meet with your fire official for final inspection when
one is required.

### 5. Monitoring and Ongoing Service

Your system goes live on 24/7 monitoring, and we schedule your future inspections.

## Why Choose TekPro

 * **Licensed for fire alarm work in Florida.** Our license holder, [Cole Connolly](https://tekproalarm.com/about/),
   is a TekPro partner and full-time employee with license [EF20002191](https://tekproalarm.com/about/).
 * **Local and reachable.** Based at 1609 Lisenby Avenue in Panama City. Live people
   answer our phones.
 * **Our own technicians.** We don’t send subcontractors to your service calls.
 * **One team for everything.** Fire alarms, [security systems](https://tekproalarm.com/home-security/),
   [cameras](https://tekproalarm.com/cctv/), and [access control](https://tekproalarm.com/access-control/),
   all from the same company.
 * **Straight answers.** Honest recommendations and clear pricing.

## Service Area

We serve homes and businesses in Panama City and across Northwest Florida, including
Panama City Beach, Lynn Haven, Callaway, Parker, Springfield, Mexico Beach, and 
the rest of Bay County, plus Gulf, Franklin, Holmes, Washington, Jackson, Walton,
and Okaloosa Counties.

## Frequently Asked Questions

Yes. In Florida, fire alarm work requires an alarm system contractor license that
includes fire. Our license holder, Cole Connolly, holds Florida license EF20002191.

In many cases, yes. We can inspect, repair, and monitor most systems installed by
other companies. If your panel is outdated or parts are no longer made, we’ll explain
your upgrade options. Call us and we’ll take a look.

Most fire alarm devices must be tested at least once a year under NFPA 72, which
Florida adopts through its fire code. Some parts are checked more often, and your
local fire official may have extra rules. We’ll set a schedule that keeps you compliant.

Usually, yes. In Florida, a fire alarm system required by the building or fire code
generally has to be monitored by an approved monitoring station. Your fire official
makes the final call for your building, and we can help you find out what applies.

Florida requires smoke alarms in new homes, and newer homes with gas appliances,
a fireplace, or an attached garage also need carbon monoxide alarms. A monitored
system goes further: it calls for help even when no one is home.

A conventional system shows which zone an alarm came from. An addressable system
shows the exact device. Addressable systems cost more up front, but they’re easier
to troubleshoot and work well in larger buildings.

Your panel signals the monitoring center right away. The center contacts the fire
department and calls the people on your contact list. Trouble signals, like a low
battery or cut wire, are reported too so they can be fixed quickly.

It depends on the size of the building, the type of system, and what your code requires.
We’ll visit, look at your space, and give you a clear, free quote with no surprises.

## Get a Free Fire Alarm Quote

New system, inspection, or repair, tell us what you need and we’ll get back to you
fast.

[Request a Free Quote](https://tekproalarm.com/#contact) [Call (850) 329-8126](https://tekproalarm.com/fire-alarms/8503298126)